1 2 3
BoxheadTim
BoxheadTim GRM+ Memberand Dork
4/5/10 8:17 a.m.
Chris_V wrote: http://www.cafepress.com/adesso/1884702 Shameless self promotion...

Where's the Miata?

John Brown
John Brown GRM+ Memberand SuperDork
4/5/10 8:24 a.m.

It's right there... it just says FIATa

ReverendDexter
ReverendDexter Dork
4/5/10 9:20 a.m.

Huh, whoever did those "sweep" cars is obviously not a Mustang fan. They made 'em both look like UFOs, meanwhile they used the bodylines from a '69 Mustang as the sweep for a 2nd-gen Camaro.

Chris_V
Chris_V SuperDork
4/5/10 10:40 a.m.
ReverendDexter wrote: Huh, whoever did those "sweep" cars is obviously not a Mustang fan. They made 'em both look like UFOs, meanwhile they used the bodylines from a '69 Mustang as the sweep for a 2nd-gen Camaro.

Actaully, no, they were essentially "traced" off of side veiw photos to make sure the proportions were accurate.

I've owned 3 1970 Mustnag fastbacks, as well as a 2nd gen Trans Am and Camaro.

And as you can tell, right now CafePress has the designes on hold. Which is why I also don't do anything modern like a miata.

The idea started out with the VW and hot rod ones, as I was trying to get the definition of the car with only 5 or fewer lines. I only added the '67 Mustang style after doing one on commission for a Mustang parts source.

And these need to find a way to get up there again (just the bus and ghia are there now)

I'm also kind of pissed at the new Infiniti ads, as I've been doing these designs for about 8 years...

John Brown
John Brown GRM+ Memberand SuperDork
4/5/10 2:11 p.m.

Cafepress will not let you (1) use the OEs name (2) Use ANY facsimile of the OEs design and (3) make a profit.

I use them for stuff I do not plan to make any money from period.

Chris_V
Chris_V SuperDork
4/5/10 3:01 p.m.
John Brown wrote: Cafepress will not let you (1) use the OEs name (2) Use ANY facsimile of the OEs design and (3) make a profit. I use them for stuff I do not plan to make any money from period.

What pisses me off is you can't use any car names in the keywords to drive buyers to your designs even if there is no trademarked material in the design. And if you have a design based on a photo of your own car, you can't use that car's model/make in the keywords that peolel would use to search with, without getting hit by an IP infringement notice.

I did a design for a drag strip, using a stylized hot rod, and made the mistake of putting a couple car brand names in the keywords ("drag racing, drag strip, muscle car, drag car, hot rod, chevy, ford, mopar, quarter mile") and the design got yanked for IP infringement for using the names in the keywords that people use to search with. Same for my BMW club T shirts. It'd be like going to google and typing in Ford and ONLY getting the factory Ford site because the word is trademarked and can't be used in searches.

So I just let them take the designs down, then put them up again a few months later.

Those hot rod shirts paid for my BMW...

JeepinMatt
JeepinMatt HalfDork
4/5/10 4:03 p.m.
Chris_V wrote: http://www.cafepress.com/adesso/1884702 Shameless self promotion...

So why are the Mustang and Camaro designs on hold, but the rest aren't? I'd love to see an old Wrangler or E30 shirt, but I like all of them.

Pseudosport
Pseudosport New Reader
4/5/10 4:54 p.m.

How about a 2 door jeep Cherokee?

Chris_V
Chris_V SuperDork
4/5/10 4:59 p.m.
JeepinMatt wrote:
Chris_V wrote: http://www.cafepress.com/adesso/1884702 Shameless self promotion...
So why are the Mustang and Camaro designs on hold, but the rest aren't? I'd love to see an old Wrangler or E30 shirt, but I like all of them.

Because they go by whether or not someone reports the design. there are hundreds of Mustang and Camaro designs on there, but if they aren't reported, they never get taken down.

JoeyM
JoeyM Reader
4/6/10 5:10 a.m.
John Brown wrote: http://www.cafepress.com/PCHCofficialGRM.339675029

This one is wonderful

914Driver
914Driver SuperDork
4/6/10 7:49 a.m.

Our British cousins, so much like us.

http://ratbike.org/shop/products.php?m=9f82518d46&g=bafe5caf93

http://ratbike.org/shop/products.php?x=2&g=dbd4c5cfc7

ultraclyde
ultraclyde Reader
4/6/10 8:57 a.m.

http://enthusiastapparel.com/

great stuff but a little pricey. Anyone that has a tshirt with the Nurburgring on it rules. I also like the Heel Toe Hero stuff

John Brown
John Brown GRM+ Memberand SuperDork
4/6/10 9:39 a.m.
JoeyM wrote:
John Brown wrote: http://www.cafepress.com/PCHCofficialGRM.339675029
This one is wonderful

Thank you.

DukeOfUndersteer
DukeOfUndersteer SuperDork
4/6/10 9:42 a.m.
John Brown wrote:
JoeyM wrote:
John Brown wrote: http://www.cafepress.com/PCHCofficialGRM.339675029
This one is wonderful
Thank you.

you should put a cone in front of the text, knocked over...

93celicaGT2
93celicaGT2 SuperDork
4/12/10 1:54 p.m.
93celicaGT2 wrote: I'd like any of these in t-shirt (or sticker form, for that matter) form.

Bumpage. Anyone know where to get these? Want. Bad.

Karl La Follette
Karl La Follette HalfDork
4/12/10 2:14 p.m.

<img src="Photobucket" />

tuna55
tuna55 HalfDork
4/12/10 2:18 p.m.

more shameless self promotion?

http://www.tunachuckers.com/7.html

volvoclearinghouse
volvoclearinghouse New Reader
4/12/10 2:41 p.m.

Don'tcha just gotta have an Authentic Tunachucker 24 Hours of LeMons Volvo Amazon shirt?

http://www.tunachuckers.com/7.html

(Note, I only have white and grey ones left!)

SVreX
SVreX SuperDork
4/12/10 3:35 p.m.

Now HERE'S some shameless self-promotion!

cwh
cwh SuperDork
4/12/10 3:46 p.m.

Don't you think it's dangerous to post a picture of your beautiful daughter on this site?

STS_ZX2
STS_ZX2 New Reader
4/12/10 4:41 p.m.

http://www.zazzle.com/speccivic_so_easy_even_a_caveman_can_do_it_tshirt-235470682475040818

Shirts don't have the Geico or the Gekko on the graphic...but you get the idea.

SVreX
SVreX SuperDork
4/12/10 5:18 p.m.

1slowcrx
1slowcrx HalfDork
4/13/10 2:43 p.m.
93celicaGT2 wrote:
93celicaGT2 wrote: I'd like any of these in t-shirt (or sticker form, for that matter) form.
Bumpage. Anyone know where to get these? Want. Bad.

I love these!! Looks to me like he just had someone that does vinyl cut them out. I'm sure you could just send a MS Paint JPEG image to one of the bigger companies and have it done

John Brown
John Brown GRM+ Memberand SuperDork
4/13/10 3:14 p.m.

I will have a set up on my CP site tonight. I was working on them last night. The K&M came out most excellent, the rest are pretty fair.

Twin_Cam
Twin_Cam Dork
4/13/10 7:21 p.m.

I'm still waiting for GRM to make their generic t-shirt in size Small, for skinny emo kids like me!

And the Mad Cow Designs link wins. I may need to purchase the "Eat Sleep Wrench" one.

1 2 3

You'll need to log in to post.

Our Preferred Partners
v3tVGtWuq3URp8dFTErNEUbzfvOwzMoN9VrJRTB3fRzVL9jHjWqY5Xp4CSVH2ixF