Patrick’s garage dump sale

Will keep updating as i go.  Throwing parts up as i see, will try to add pricing as i can.  Basically this is like the movie The Purge but with my garage.  Pics on request, can ship or try to grm relay most stuff

cast aluminum tall sbc perimeter bolt valve covers

7 type 1 vw engine cases, lots of small vw engine related bits

vw bug irs trailing arms, transmission, and axles

gmt800 truck aluminum wheel center caps

2001 corvette engine harness

sbc hei distributors

sbc points distributor

16" gmt400 chevy truck trim rings 

Vw beetle ball joint spindles

conversion van rear door ladder

98ish bravada front bumper cover

98 astro front bumper cover

98+ p71 vic computer mounting hardware and police console with keyboard mount

too many truck LS exhaust manifolds

91-96 caprice/roadmaster wagon rear roll pan and rear fender cutout flares

astro van overhead console grey 

Gmt400 underhood trouble light

LSx awd pan, front diff, transfer case, front driveshaft from 5.3 envoy

misc first gen Q45 parts ecm cluster interior+
 

1969 porsche 911 steering rack

2010-21 ram 3500 factory gooseneck hitch new

Corvair wiper motor

factory five coupe bilstein coilovers 

2015 mustang 17x5 spun aluminum spare wheel

67-69 camaro rear bumper

gmt400 front fender flares 

stainless towing mirrors

k5 blazer rear driveshaft for th350 w/ part time transfer case

gmt400 c notches

2004 zx12r runs awesome needs clutch

yamaha tri moto 225dx project needs much but is mostly there, converted rear to suzuki 2 piece wheels, new carb and coil, fires on starting fluid

Vh45de engine complete ran great

assortment of 2" trailer hitch ball mounts

Gmt400 trailer hitch 

95ish s10 new Radiator

72 chevelle factory disc spindles and core calipers

67-72 A body gm new brake booster and master 

aftermarket vw gti stock style fender flares new

new 23x8.50x12 tire chains for garden tractor

4.8-5.3 4l60e DBC engine harness 

Wow I can't believe I read that whole list and didn't immediately text you wanting something.

I could probably use some truck manifolds along with whatever other LS bits you are digging up for me.

Two passenger's side if it doesn't screw up anyone else's request, please.

lemme get that corvette engine harness, so i can put it up here in a few years...

nevermind, who am i even trying to kid.  there's no LS swap goodness in my foreseeable future.

However, i'm passing by Patrick's tomorrow and can pick up small-ish things for transport to the western suburbs of Detroit.  I'm driving my E92 hence the "small-ish things"

Patrick (Forum Supporter) said:

2015 mustang 17x5 spun aluminum spare wheel

Sure it's not 18"? Car-Part doesn't list a 17" spare for a 2015 Mustang. 

Patrick I could use 2 or 3 of those Gen4 5.3 pistons I sent you last year if you are willing to let those leave with Angry.

In reply to obsolete :

Maybe wrong year i have too much to keep straight.  It's definitely a 17 i have a tire mounted on it for testing right now.  Was going to use for skinnies with adapters but i found a 17x4.5 gm wheel that works with my tires 

In reply to Patrick (Forum Supporter) :

Engine test stand the one I vaguely remember you beating me to a few years ago?  Might be interested.

In reply to Patrick (Forum Supporter) :

Oh in that case I could use the whole set. Always good to have spares for my sad L33 block.

Making room just in case? 

In reply to RacetruckRon :

Stampie said:

In reply to Patrick (Forum Supporter) :

Engine test stand the one I vaguely remember you beating me to a few years ago?  Might be interested.

Do you have any pictures or other info on this engine test stand in case stampie doesn't want it? 

In reply to Somebeach (Forum Supporter) :

Stampie has purchased it already. 
 

tow dolly going to dusterbd13
 

Air cooled VW parts?  I'm listening...

I might be interested in the  "factory five coupe bilstein coilovers" are they challenge car friendly $$ ?

I can't be the only one thinking the Trimoto and the ZX12 need to go to the same place..   ..

Price for the zx12r?

You've got my number

How long are the Bilsteins and what sort of ends do they have?

Bilsteins are probably not very challenge friendly i paid around 250 on here and was hoping to get around 200 out of them plus whatever a flat rate box is now.  Will get specs and pics later.

zx12r is in the $3600 range now, not mine so i have nothing to do with pricing.  I was storing it for a friend then he asked me to do clutch and list it for 5k and we would split anything above what he paid, but between his new job and my never ending list of projects it's been covered since spring except for when i put the battery in and run it.  Has really nice yoshi pipe and sounds amazing and it's all black.  I don't know anything about it other than sean bought it, it's too much bike for him to ride daily so he kept it as a toy, and then his garage space went away so he kept the suzuki he bought new.

octavius what do you need?  I have 8 cases, lots of heads, bins of smalls, some tins, carbs, intakes, etc.  have a 914 1.7 engine and maybe willing to sell my type 4 2.0 bus engine out of my sand rail because i want to put in something i'm more familiar with

2nd in line for the Bilsteins if Brotus passes.

I'm glad someone else asked about the zx12r first. 

However a clutch should be an EASY job but I expect that even a used one in eBay is about $200

In reply to Robbie (Forum Supporter) :

Looks like new frictions and steels are sub $200 and internet says it's easy.  I will likely fix it over winter to price high for spring but if it goes away prior to that and sean gets his money back i like floor space and need more

FFR bilsteins:

have pair, 450# springs.  Extended all the way 15 3/4 eye to eye.  Numbers on shock body 4004BE3 A27T30

In reply to Patrick (Forum Supporter) :

Those look nice! Sadly too long for me, thanks.