1 ... 6 7 8
nsogiba
nsogiba Reader
10/8/24 12:55 p.m.

 

It has been a long time coming but the prophecy has finally been fulfilled. I sold my X5 a few weeks ago and brought home a new DD. I now own nothing but V8 powered vehicles. 

2005 Suburban 2500, 6.0/80E, 4.10s, LT package with heated leather, 3rd row, rear seat entertainment, everything I need and nothing I don't. This popped up on CL in Phoenix and although I considered doing a fly and drive, the schedules didn't work so I just had it shipped. Having driven it for a few days now I wouldn't hesitate to go across country though. 

I already pulled off the crazy dark tint and need to clean the interior a bit. For the mileage it's in nice shape and most importantly there is no rust on the body, and minor surface rust on the frame as it lived in Idaho most of its life. 

Fits in the garage with a little room to spare.

Stupid amounts of space inside. I love it

The short term plan is to change every fluid and do a general tune up, plugs/wires etc. I plan to replace the headlights since they're all cloudy and install a Z71 lower valence with the round fog lights. I have a 41930 upgraded hitch on the way and right before winter I'll paint the exposed areas of the frame and then have it undercoated (recommendations on products?). 

The long term plan is a small turbo and drive the wheels off it.

I spent a few days after it arrived changing the oil in the engine, trans, and differentials. Still need to do the transfer case. 

Slapped on a 41930 hitch and put it to the test towing my M3 300 miles round trip down to Watkins Glen for an HPDE weekend. I slept in the truck for 3 nights at the track with plenty of room for all my overnight and cooking stuff. The rig was comfortable and towed great, no doubt due to the long wheelbase and heavy weight. 

 

buzzboy
buzzboy UltraDork
10/8/24 3:03 p.m.

The 3/4 ton suburban hits a perfect balance for towing a single car trailer. Enough power, enough wheelbase, enough weight, room for tools and sleep, all without being too big or cumbersome.

APEowner
APEowner GRM+ Memberand UltraDork
10/8/24 4:42 p.m.

In reply to nsogiba :

Nice truck.  I currently own nothing with a V8. That makes me sad.

Keith Tanner
Keith Tanner GRM+ Memberand MegaDork
10/9/24 11:58 a.m.

A few older ones.

2000 Jeep Grand Cherokee with the V8. 

To this day, I don't recall how I loaded this.

I did eventually buy a new trailer :)

About the max load for this rig, a 2000 lb Miata.

Here's the 2000 Toyota Tundra that took over, although I don't have a picture of it with a trailer. Worked fine although it wasn't exactly restful going over the big passes with a 16' enclosed trailer with a Miata inside. That's what ran the 2008 Targa Newfoundland support, 8000 miles of towing and 1000 miles of race support. Pic is of a roadside adjustment on a transit stage. I must have more pictures of it somewhere but I don't know where.

It was replaced with the 2010 Cummins on the first page of this thread when the trailer was replaced with a 28' two-car.

spacecadet (Forum Supporter)
spacecadet (Forum Supporter) GRM+ Memberand UltraDork
10/10/24 2:02 p.m.

I bought a 2013 GX460 last year to be a comfy multi tool in my fleet and tow here and there.

I pulled a Fit across texas on a dolly earlier this fall with no issues at all at 65mph and got 17+ MPG doing it.

 

Earlier this year my buddy had issues in Austin with his tow vehicle and we opted to use my GX to tow his car home from COTA on his trailer.

truck did great with this one too, but it was a short trip.

Sonic
Sonic UberDork
10/13/24 12:19 p.m.

In reply to nsogiba :

Fluid film did an amazing job of making my old GMT800 2500 the last rust free one left in PA.  Take your time to get it up into all the little crevices on the rockers and whatnot.  It also kept my wife's daily driven Mazda3 essentially rust free after 250k daily driven PA miles.  

gearheadE30
gearheadE30 Dork
10/14/24 12:49 p.m.

@nsogiba looks just like mine! 8.1 3.73s here, otherwise basically the same truck. 

I used Woolwax on mine. It's a bit thicker than fluid film and in my (limited) experience it seems to last a bit longer before needing to re coat. But anything is better than nothing. 

nsogiba
nsogiba Reader
10/14/24 12:57 p.m.

Sweet! I was quoted anywhere between $250-$350 to have Woolwax professionally applied. There is a kit for $265 on Amazon that includes 2 gallons of Woolwax, the applicator gun, etc. Thinking I might just attempt it myself (heated garage with a lift). 

Maybe I'll just start a new thread...

Jesse Ransom
Jesse Ransom GRM+ Memberand MegaDork
10/26/24 1:19 p.m.

No pics with a trailer attached yet, but I'm super-stoked to have ended my no-truck status. After the '97 F-250 was stolen we considered living without the complexities and costs of that extra vehicle. I think I thought I made it the better part of a week, but my wife later assured me I'd cracked within a couple of days. Not having a truck seems to immediately cause the need to move bulky or heavy things.

Anyhow, after a few weeks of looking and a couple of false starts, we now have an ex-Washington-DOT 2011 F-350. 6.7L diesel, RWD, virtually frill-free. Crank windows, manual door locks, AM/FM radio. 241k miles, but drives really, really nicely, and a PPI at a local diesel specialist gives me hope it's not hiding anything. It was a fleet vehicle, fingers crossed that meant regular maintenance, and the condition suggests it wasn't spending its days with folks who hated their jobs and took it out on the truck. It was $10k cheaper than the 140k-mile '08 Lariat 4x4 some GRMers were kind enough to help talk me down from.

I need to get an actual stereo in with a rear camera, try a tonneau cover perhaps, and figure out how I want to approach the moto-loading part. I'm busy with the new driveway, which also makes the shop inaccessible, and will happily take this excuse to farm out a full fluid-and-filter reset so I know where everything is. I'm stoked.

Apexcarver
Apexcarver MegaDork
10/26/24 9:30 p.m.

So, if you want to see a novel setup...  Good friends of mine (I'm part of the YouTube channel as well) have an exocet set up to flat tow, behind a Tesla model Y. 

 

A 401 CJ
A 401 CJ GRM+ Memberand UltraDork
10/27/24 9:36 p.m.
Jesse Ransom said:

No pics with a trailer attached yet, but I'm super-stoked to have ended my no-truck status. After the '97 F-250 was stolen we considered living without the complexities and costs of that extra vehicle. I think I thought I made it the better part of a week, but my wife later assured me I'd cracked within a couple of days. Not having a truck seems to immediately cause the need to move bulky or heavy things.

Anyhow, after a few weeks of looking and a couple of false starts, we now have an ex-Washington-DOT 2011 F-350. 6.7L diesel, RWD, virtually frill-free. Crank windows, manual door locks, AM/FM radio. 241k miles, but drives really, really nicely, and a PPI at a local diesel specialist gives me hope it's not hiding anything. It was a fleet vehicle, fingers crossed that meant regular maintenance, and the condition suggests it wasn't spending its days with folks who hated their jobs and took it out on the truck. It was $10k cheaper than the 140k-mile '08 Lariat 4x4 some GRMers were kind enough to help talk me down from.

I need to get an actual stereo in with a rear camera, try a tonneau cover perhaps, and figure out how I want to approach the moto-loading part. I'm busy with the new driveway, which also makes the shop inaccessible, and will happily take this excuse to farm out a full fluid-and-filter reset so I know where everything is. I'm stoked.

That should be a ripper in 4x2 with that Tarantula engine.  400 hp / 800 torques if I remember correctly.

Jesse Ransom
Jesse Ransom GRM+ Memberand MegaDork
10/28/24 11:16 a.m.

In reply to A 401 CJ :

It does seem to move right along! Looking forward to doing actual truck things with it.

Thanks again for the diesel advice.

1 ... 6 7 8

You'll need to log in to post.

Our Preferred Partners
E4UDlkavcJeMdFlBP2THyOB5MAmAWgc1jyoBkWXQ5WWG8FGYVcEcbWgGH1YxIMAn